Advantages of laser marking for beer and glass bottles



Advantages of laser marking for beer and glass bottles
 
Beer is one of the oldest alcoholic beverages in humans and the third most consumed beverage in the world after water and tea. Beer was introduced to China in the early 20th century and is a foreign wine. Beer is translated into Chinese "beer" according to English Beer, which is called "beer" and is still used today. Beer is a low-alcoholic alcoholic beverage with barley malt, hops and water as the main raw materials. The low-alcoholic wine with carbon dioxide produced by yeast fermentation is called “liquid bread”. Beer has the lowest ethanol content, so drinking beer is not only intoxicating, but also a small amount of drinking, but it is good for your health.

 

In the past, the beer industry was very fast in processing, the bottle was swaying during processing, and the processing environment was relatively humid, so the processing requirements were very high. Whether it is traditional marking means or laser marking, it requires extremely harsh conditions. . Nowadays, with the development of laser technology and the continuous improvement of automation level, the application of laser in the bottle wine industry has gradually become wider, and the superior performance advantage is gradually replacing the traditional processing method.

   

Using the current laser marking machine to focus on the surface of the beer glass bottle through a very high-energy laser beam, the surface layer is physically vaporized in a very short time under the action of high laser energy, leaving a smooth and textured surface on the surface. The pattern is marked, and the effective displacement of the laser beam can be controlled to accurately mark the delicate pattern on the surface of the beer bottle. Compared with traditional marking, laser marking is more expensive than traditional marking, but laser marking can leave a clear and textured permanent marking on the surface of the bottle, and it can not be rubbed and altered. Good has played the role of anti-counterfeiting logo, which is undoubtedly not a favorable processing method for the highly competitive bottle wine industry. With the continuous upgrading and improvement of laser technology, the service life and performance of the laser have been greatly improved. Like the current fiber laser marking machine, the marking is clear, the scope of application is wide, and the maintenance cost is low; I believe that in the near future The application of lasers in the beer industry will become increasingly widespread.