2000-36000BPH Bottle CSD Filler Featured



  • Brief Description
  • Specification
  • Video
  • Related Products


The automatic filling carbonated beverage production equipment is suitable for the filling of plastic bottles or glass bottles containing gas drinks. It can be used for bottle rinsing, filling and sealing on one machine. The design is scientific and reasonable, the appearance is beautiful, the maintenance is convenient, the suspension type bottle mouth holding is convenient to replace the bottle type. Quick and labor-saving.

The pressure filling machine is filled at a pressure higher than atmospheric pressure, and can also be divided into two types: one is that the pressure in the liquid storage tank is equal to the pressure in the bottle, and is filled by the liquid self-weight flowing into the bottle, which is called Isobaric filling; the other is that the pressure in the liquid storage tank is higher than the pressure in the bottle, and the liquid flows into the bottle by the pressure difference, and the high-speed production line mostly adopts this method. The pressure filling machine is suitable for liquid filling with gas, such as beer, soda, champagne, carbonated drinks, soda water, etc.

The automatic filling carbonated beverage production equipment adopts advanced PLC programmable automatic control, human-machine interface touch screen, and is equipped with CIP cleaning system, which can clean the place where liquid contacts, and realizes rinsing, filling and capping on one machine. The appearance is beautiful, scientific and reasonable, and easy to maintain. Suspended type bottle mouth holding method, convenient for bottle replacement, quick and labor-saving, realizes no bottle and no caps feeding system, bottle jam automatic shutdown system, low noise during operation, drive motor adopts frequency conversion speed regulation, and three-in-one filling machine Keep it in sync to prevent the bottle from falling over. The photoelectric transmission switch is installed on the delivery conveyor chain. When the bottle is blocked, the three-in-one filling machine can be controlled to decelerate and stop. Key electrical components such as the inverter control unit adopt internationally renowned brands.

Additional Info

  • Specification:

    Model

    SLC-323210

    SLC-24248

    SLC-18186

    SLC-14125

    Heads of Rinsing, Filling, Capping

    32,32,10

    24,24,8

    18,18,6

    14,12,5

    Capacity
    (Bottles per Hour)

    10000-13000

    8000-10000

    5000-7000

    2000-4000

    Suitable Bottles
    (mm)

    Φ500-100, H=150-320, 330-2000ML

    Rinsing Pressure
    (kg/cm)

    2-3

    Input Watt
    (kw)

    7.5

    3.92

    3.2

    2.07

    Dimension
    (mm)

    4,350
    ×2,880×3,200

    3,100
    ×2,100×2,650

    2,460
    ×1,860×2,650

    2,300
    ×1,600×2,500

    Weight
    (kg)

    6,000

    4,800

    3,650

    2,800