Bottle de-capper consists of de-capping head, body frame structure, and PLC controlling system. When bottle enters into working position, de-capping head goes down to remove cap form bottle neck, then bottle moves for filling by filler.

No bottle neck and cap would be hurt during de-capping process, which speed is automatically adjustable. No bottle, no de-capping movement. When bottle jam happen de-capper will stop running until jam is eliminated.

While the bottle enters into the decapping machine, photoelectric sensor will give the signal to PLC controlling unit, PLC will instruct decapping cylinder and bottle hold cylinder to complete up and down action, while the decapping head catch the cap, bottle move forward along the conveyor chain.

Features:

1) With the bottle controlled by photo-electrical signal. When no barrel or the outlet of cap-removing machine is jammed, the bottle will be transferred to the lower part of the de-capping head by conveyor belt with automatic positioning.

2) The cap-removing head consists of four pieces of arch claws. The head open and press on the bottle neck. Tightened with four pieces of arch claws and locking the edge of the bottle neck in a fast way. The bottle is raised and the cap is removed. Then bottle is released automatically, with cap blown to the collector by air.

3) During the process of cap-removing, the edge of the bottle will not be damaged.

4) Adopting PLC program controlling unit and pneumatic cylinders, it can work in a complete water filling line. Decapper head does not hurt cap and bottle neck at all. So cap can be re-used. Capacity is adjustable. It is compatible with a wide range of bottle height and cap diameter.